Deister Screens and Feeders

New Deister Ultra-Fines Recovery System (UFR)

Deister Machine Company Inc.

The Deister UFR System is capable of recoveries to 350-400 mesh at feed capacities from 1500-3500 GPM.  It utilizes a radial distribution manifold for even distribution of solids to all cyclones.  The reverse slope vibrating screen is available in sizes up to 7’ wide and 12’ long, with solids capacities up to 70 TPH.

  • Recovers ultra sands & silts
  • Greatly reduces settling pond cleaning & maintenance
  • Allows producers to turn waste materials into saleable product
  • No need for polymers & flocculants

Specifications:

  • Cyclones are available with a variety of liner and body materials.
  • Victaulic connections allow flexibility and ease of maintenance.
  • Optional “Duck Bills” can be attached to the cyclone apex with siphon control to accommodate variable feed solids conditions.
  • Sump is constructed with heavily reinforced ¼” walls and wide flange beam vertical columns.
  • Sloped bottom plate promotes even solids flow to the pump inlet and an automatically adjusted make-up water valve protects the pump.
  • Sturdy hand railed stairway and platform on both sides and back of the screen allow for safe and easy maintenance access.
  • Several pump configurations are available mounted on a steel frame base pad.
Deister Machine Company Inc.

A high-capacity, two-deck, 5′ x 12′ inclined drum mix asphalt plant scalping screen with reversible side discharge chutes, undersized chute, stationary deck selector/bypass chute and sub-base .

Deister Machine Company Inc.

A heavy duty, three-deck, 8′ x 20 inclined washing/rinsing screen with dual vibrating mechanisms and baked epoxy coated springs .

Deister Machine Company Inc.

A two-deck, 5′ x 10′ horizontal vibrating screen designed for use in stationary or portable plants where a lack of headroom prevents the installation of inclined screens .

Deister Machine Company Inc.

A single-deck, 6′ x 12′ dewatering screen featuring heavy duty construction and increased centrifugal force, designed to capture and dewater fine material.

Deister Machine Company Inc.

A three-deck, 6′ x 20′ triple-shaft horizontal screen; combines the efficiency and low headroom of horizontal screens with the benefits of a smooth running oval stroke usually associated with inclined screens.

Deister Machine Company Inc.

A base-mounted, step-deck constructed, 84″ x 16′ vibrating grizzly with 64″ grizzly bars. Cast manganese steel grizzly bars are individually mounted for adjustability and ease of replacement.

Deister Machine Company Inc.

A 60″ x 24′ vibrating grizzly feeder; combines scalping and feeding in one operation while providing a continuous, uniform material flow from the hopper to the crusher.

Deister Machine Company Inc.

A single-deck 6′ x 16′ high-speed vibrating screen; its higher G-force and steeper inclination results in optimum separation of fine materials.

Deister Machine Company Inc.

A four-deck, 6′ x 16′ dual sand deck, inclined vibrating asphalt plant screen; its increased capacity on the sand deck is ideal when the surface course requires a larger percentage of sand in the mix.

Deister Machine Company Inc.

A two-deck, heavy-duty, 7″ x 16′ inclined washing/rinsing screen; its Type T vibrating mechanism features a powerful positive elliptical throw action that permits a flatter screen operating angle by controlling material movement on the screen for the greatest speed and efficiency in sizing.

To learn more about Deister Screens and Feeders go to the CONTACT tab or WEBSITE link below to reach Deister directly.

Deister Machine Company Inc
1933 E Wayne St, Fort Wayne, IN 46803, USA
No Tab Selected

Deister
Always Family Owned
Always Customer-Focused
And Celebrating a Century of Service.

Deister equipment is customized to specific customer requirements and built to produce material that meets today’s rigid specifications. Designed to integrate with all other components within an operation; Deister’s reliable separating and sizing equipment is engineered to operate hour after hour, day after day, with minimum attention and maintenance.

Extremely rugged construction is the operator’s assurance of long, dependable, trouble-free, operating life from every Deister unit; while lower maintenance costs, uninterrupted production schedules and accurate sizing add up to lower costs per ton.

At Deister, service is personal and responsive as top management is personally interested in the continued profitable operation of every Deister machine.

Deister Rebuilding Services Are economic conditions limiting your ability to replace your equipment? As the original manufacturer of your equipment, we have the knowledge and experience to return your equipment to optimal operating condition. Our top-rated Deister personnel are available to visit your site to evaluate your equipment and make recommendations. Send your equipment to Deister for a detailed analysis and let our trained personnel rebuild your equipment using genuine Deister parts.

• Save money building versus buying new
• Modify or adapt equipment for other applications
• Restore equipment to “as new” condition