Miner Elastomer Product Corporation’s Revolutionary Shock Absorbing Material

Miner Elastomer Product Corporation develops and implements unique applications for TecsPak®, Miner’s revolutionary shock absorbing material totally different from anything else available today.

Patented TecsPak® is an acronym for: Thermoplastic  Elastomer  Compression  Spring  Package

TecsPak® equipped products have been proven to far outlast comparable products made of rubber, urethane, or steel – and can operate under an extremely wide temperature range. TecsPak® is relatively inert and resists exposure to dust, oils, hydraulic fluids, and gasoline. With TecsPak®, you are assured of improved performance and productivity. Let our design engineers demonstrate how TecsPak® will work for your applications.

Wheel Chocks

Wheel Chocks EPM0112600

Length 18.00 in.
Width 14.00 in.
Height 16.00 in.
Weight 35.00 lbs.

These wheel chocks are intended for use up to 240T-400T Payload trucks (GVW 1,600,000 lbs) and 105″-165″ (267-419cm) tire diameters and meet the following OSHA and MSHA specifications: 1910.178(K) 1910.178(M) 30 CFR §56.14207.

Conveyor Rollers

Conveyor Rollers Impact and Picking-EU-ROLLER®

Their superior performance means reduced downtime due to failure and cost savings over the life of the conveyor.
Advantages of the Impact and Picking-Idler EU-ROLLER :

  • Flexible
  • Higher resistance to wear
  • Corrosive resistance roller body
  • Longer bearing life
  • Lighter mass of the roller
  • Shock resistant bearing cover
  • Very low noise pollution

 

Mining Shovel Components

Mining Shovel Components EP90001322 (Latch Bumper)

OD 1.72 in.
ID 0.79 in.
Free Height 4.63 in.
Solid Height 2.00 in.
Length N/A
Width N/A
Mounting Hole 0.79 in.
Total Height with Rods N/A
Weight 3.28 lbs.

Miner Elastomer Products offers a large line of shovel  components designed to improve performance, reduce downtime  due to maintenance and increase shovel output. Our shovel  components ability to absorb impacts result in longer life allowing  for reduced shovel maintenance and overall lower operating cost.

 



Request For Additional Information:

    No Tab Selected

    Miner Enterprises was founded in 1894 after W.H. Miner developed a revolutionary draft gear for cushioning the impact between rail cars. As a division of Miner Enterprises, Miner Elastomer Products Corporation carries onward the innovative technical tradition established by W.H. Miner. MEPC® was formed in 1985 to develop and implement unique applications for TecsPak®, Miner’s revolutionary shock absorbing material totally different from anything else available today.