Aerodyne Environmental www.dustcollectorhq.com, a manufacturer of industrial dust collectors and material handling valves, announced its Dust Hound Dust Collector. About 55% as tall as a standard cyclone for the same efficiency and airflow, it more easily fits available space without costly facility and process line renovations. Also, it lowers cost by allowing the smallest size cyclone that will do the job.
No other cyclone on the market is as small while remaining this efficient, up to 99% at 20 microns.
What’s more, small cyclones can be used for point-of-use dust collection that may help managers achieve NFPA compliance for potentially combustible dust without costly ductwork. Per NFPA-654 184.108.40.206.2 (2), air separators with a dirty side volume less than 8ft3 can be safety located indoors, under certain circumstances.
Applications include point-of-use product recovery, pneumatic conveying, and as a pre-filter for other dust handling equipment such as cartridge collectors, baghouses, electrostatic precipitators and wet scrubbers. As a pre-filter, a cyclone can increase filter life, lower compressed air usage, and reduce filter maintenance.
Industries targeted include ceramics, plastics, chemicals, metal powders, food ingredients, industrial woodworking and quarries.
Unique Design Increases Efficiency
Constructed of carbon steel, the Dust Hound cyclone uses a specially shaped ground plate to divert dust towards the walls and to interrupt the airflow, creating a very localized pressure drop that causes more particulate to fall out of the airstream and reduce dust re-entrainment.
The Aerodyne Dust Hound is available now. Model DH-24 is 42.38 inches tall, model DH-30 is 54.38 inches tall, and model DH-48 is 89.50 inches tall. Air flow rates are per the table below.
To comment on this story or for additional details click on button above.